Radio Shack TRC-488 Connections, Connecting Microphone, Connecting AN Optional External Speaker

21-1585.fm Page 6 Thursday, August 5, 1999 9:39 AM

CONNECTIONS

CONNECTING THE

MICROPHONE

1.Make sure the pins on the micro- phone cable’s plug are aligned with the holes in the CB’s MICRO- PHONE jack on the CB’s left side and insert the plug into the jack.

Caution: Never pull on the micro- phone cable.

CONNECTING AN OPTIONAL EXTERNAL SPEAKER

You can connect an external speaker to the CB.

(illus)Notes:

2.Slide the microphone onto the microphone holder.

(illus)

To disconnect the microphone cable, press and hold down the small tab on the microphone plug, then pull out the plug.

(illus)

•You must use an 8-ohm speaker capable of handling up to 5 watts of power (such as Radio Shack Cat. No. 21-549).

•The speaker’s cable must have a 1/8-inch plug.

To connect an external speaker, sim- ply plug the speaker’s cable into the CB’s EXT jack.

(illus)

Note: When you connect an external speaker, the CB’s internal speaker dis- connects.

6