Radio Shack Trunk Mount owner manual Connecting Two Speakers

12-1976.fm Page 15 Tuesday, July 13, 1999 10:01 AM

Connecting Two Speakers

If you are connecting only two speakers, you can connect them to the amplifier’s front (FL and FR) or rear (RL and RR) speaker terminals.

1.Connect one end of a speaker wire’s marked conductor to the amplifier’s FL+ (front-left positive) or RL + (rear-left positive) terminal.

2.Connect the end of the speaker wire’s unmarked conductor to the ampli- fier’s FL− (front-left negative) or RL − (rear-left negative) terminal.

3.Repeat Steps 1 and 2 to connect a speaker wire to the amplifier’s FR+ and FR− (front-right) or RR + or RR − (rear-right) terminals.

4.Connect the other ends of the speaker wires so FL connects to the front-left speaker and FR to the front-right speaker, or RL connects to the rear-left speaker and RR connects to the rear-right speaker.

15