Viewing and Resetting the Max Wind Speed Record

To view the maximum wind speed recorded since the last memory reset, press MEMORY.

￿￿￿appears. The time the wind speed was recorded in memory, the direction the wind was blowing, and ￿￿￿￿￿ appear simulta- neously.

To reset the maximum wind speed in memory and record a new high wind speed and direction beginning with the current condi- tions, hold down MEMORY for about 2 seconds until the monitor beeps.

Using the High Wind Speed Alarm

You can set the monitor to sound an alarm when the wind speed reaches or exceeds a set limit. Each time the wind speed changes and meets or exceeds the set limit, ￿￿ flashes and the monitor sounds an alarm for about 1 minute. To silence the alarm sooner, press any key.

Note: If you press a key to silence the alarm, the alarm stops sounding, but ￿￿ continues to flash until the alarm condition is no longer met.

To view the current high wind speed alarm condition, press WIND , then press ALARM.

￿￿appears.

Note: When no wind speed alarm condition is set, ￿￿￿ appears.

Setting the High Wind Speed Alarm

1.Press WIND .

2.Press ALARM so ￿￿ ￿￿￿￿￿ appears.

3.Hold down SET for about 2 seconds until the monitor beeps. The last set high wind speed condition flashes.

4.Repeatedly press (or hold down) or to adjust the setting.

5.Press SET to store the setting.

Note: If you do not press any button for about 60 seconds, the monitor returns to the current wind speed and direction display. To continue programming the wind speed alarm, start over from Step 2.

Clearing the High Wind Speed Alarm Setting

To clear the high wind speed alarm condition so the alarm does not sound, press WIND . Press ALARM so ￿￿ ￿￿￿￿￿ appears next to

￿￿￿￿, then press so ￿￿￿ appears.

Note: If the recorded conditions fall outside the operating range listed in the specifica- tions, ￿￿￿ or ￿￿￿ appear.

26

Operation