Radio Shack Weather Radio USING THE INDOOR TEMPERATURE WINDOW, Viewing/Resetting MAX/MIN Temperature Records, Using the HI/LOW Temperature Alarms, Setting a HI/LOW Temperature Alarm

USING THE INDOOR TEMPERATURE WINDOW

The weather station samples the indoor air temperature about every 38 seconds. The monitor shows both the current indoor temperature and the dew point temperature in the indoor temperature window (on the monitor).

You can display the temperature in degrees Celsius (°C) or degrees Fahrenheit (°F). Press TEMP. Then repeatedly press UNIT until ￿￿ or ￿￿ appears.

Notes:

•The monitor adjusts the unit of measure- ment (Celsius or Fahrenheit) you see for both the outdoor and indoor temperature readings simultaneously.

•You can also view the indoor tempera- ture from the thermo/hygro/baro sensor.

Viewing/Resetting MAX/MIN Temperature Records

To toggle between the current indoor temperature view and the maximum or minimum indoor temperature view (recorded since the

last memory reset), press TEMP, then repeatedly press MEMORY.

￿￿￿or ￿￿￿ appears when the monitor shows the maximum or minimum recorded tempera- ture. The recorded times of the maximum or minimum temperatures and ￿￿￿￿￿ appear in the CLOCK window.

To reset the temperature records in memory and record a new maximum or minimum temperature (beginning with the current reading), hold down MEMORY for about 2 seconds.

Using the HI/LOW Temperature Alarms

You can set the monitor to sound an alarm when a set high or low indoor temperature is reached.

Each time the temperature changes and meets or exceeds a set high or low indoor alarm condition, the current temperature and

￿￿or ￿￿ flash, and the monitor sounds an alarm for about 1 minute. To silence the alarm sooner, press any key.

Note: If you press a key to silence the alarm, the alarm stops sounding, but the current temperature and ￿￿ or ￿￿ continue to flash until that alarm condition is no longer met.

To view the current temperature and the current high or low indoor temperature alarm

conditions, press TEMP, then repeatedly press ALARM. ￿￿ or ￿￿ appears when the monitor shows the high or low indoor temperature alarm conditions.

Setting a HI/LOW Temperature Alarm

1.Press TEMP.

2.Repeatedly press ALARM so ￿￿ or ￿￿ appears.

3.Hold down SET until the last tempera- ture alarm condition flashes.

4.Repeatedly press (or hold down) or to set the temperature alarm.

5.Press SET to store the setting.

Note: The monitor automatically displays the high temperature alarm setting after you set the low alarm temperature, and vice versa.

20 Operation