To view the current high or low indoor or outdoor relative humidity alarm conditions, press the desired %RH, then repeatedly press ALARM until ￿￿ ￿￿￿￿￿ or ￿￿ ￿￿￿￿￿ and the alarm condition appear.

Note: When no humidity alarm condition is set, ￿￿ appears.

Setting a HI/LOW Relative Humidity Alarm

Note: When setting a high or low relative humidity alarm:

•If you do not press any button for about 60 seconds, the monitor returns to the current reading display. If you want to continue setting the alarm conditions, start over at Step 2.

•To keep the existing condition in any step, simply press SET to store the set- ting and advance to the next step.

1.Press the desired %RH (in either the indoor or outdoor temperature window).

2.Repeatedly press ALARM until ￿￿ or ￿￿ appears.

3.Hold down SET until the last humidity alarm condition flashes.

4.Repeatedly press (or hold down) or to set the humidity alarm.

5.Press SET to store the setting.

Note: The monitor automatically displays the high temperature alarm setting after you set the low alarm temperature and vice versa.

Clearing a HI/LOW Relative Humidity Alarm Setting

To clear the conditions for a high or low relative humidity alarm so the alarm does not sound, press the desired %RH or CHAN- NEL, if necessary. Repeatedly press ALARM

until the desired alarm setting (￿￿￿￿￿￿￿￿ or ￿￿

￿￿￿￿￿) appears, then repeatedly press until ￿￿ appears.

USING THE RAIN GAUGE

The weather station’s rain gauge measures rain as it falls and automatically calculates the rate of rainfall per hour. You can set the monitor to display the rainfall rate in in/hr (inches per hour) or mm/hr (millimeters per hour). To set the desired rainfall measure-

ment, press RAIN, then repeatedly press

￿￿￿￿until ￿￿￿￿￿ or ￿￿￿￿￿ appears.

Notes:

•We recommend you regularly check for and remove any debris that might have fallen into the rain gauge’s cylinder. Oth- erwise, rain might not properly drain into the gauge.

•The rain gauge automatically empties itself. There is no need to empty the gauge after rainfall.

To remove the rain gauge’s screen for easy cleaning, simply pull up on the string attached to the screen. When you finish, place the screen back in the cylinder and press it down into place.

USING THE RAIN WINDOW

Viewing the Previous Day’s and

the Total Amount of Rainfall

Records

To toggle between viewing yesterday’s rainfall amount and the total amount of rainfall

recorded in memory, press RAIN, then repeatedly press ￿￿￿￿￿￿ until ￿￿￿￿￿￿￿￿￿ or

￿￿￿￿￿appears.

Notes:

•When displaying total rainfall records, the time that the total rainfall memory

24

Operation