Clearing a HI/LOW Temperature Alarm Setting

To clear the conditions for a high or low temperature alarm so the alarm does not sound, repeatedly press ALARM to select the high or low temperature condition, then repeatedly

press until ￿￿￿￿ appears.

Viewing the Indoor Dew Point Temperature

Your weather station determines the current dew point temperature once it receives temperature and humidity data. Repeatedly

press TEMP until ￿￿￿ and the recorded dew point temperature appear.

4.Repeatedly press (or hold down) or to set the dew point alarm condition.

5.Press SET to store the setting.

Note: If you do not press any button for about 60 seconds, the monitor returns to the current indoor dew point temperature dis- play. To continue programming, start over at Step 2.

Clearing the Indoor Dew Point Temperature Alarm Setting

To clear the dew point alarm conditions so the alarm does not sound, repeatedly press TEMP until ￿￿￿ appears. Press ALARM

then repeatedly press until ￿￿￿￿ appears.

Using the Indoor Dew Point Temperature Alarm

You can set the monitor to sound an alarm when the indoor dew point is within a specific range (from 2–29°F or 1–16°C) of the current indoor temperature.

Each time the indoor dew point temperature changes and is within the programmed range of the indoor temperature, ￿￿ flashes and the monitor sounds an alarm for about 1 minute. To silence the alarm sooner, press any key.

Note: If you press a key to silence the alarm, the alarm stops sounding but ￿￿ and the current readings continue to flash until the alarm condition is no longer met.

Setting the Indoor Dew Point Temperature Alarm

1.Repeatedly press TEMP until ￿￿￿

appears.

2.Repeatedly press ALARM until ￿￿￿￿￿

appears.

3.Hold down SET until the indoor dew point setting flashes.

USING THE OUTDOOR TEMPERATURE WINDOW

The weather station samples the outdoor air temperature about every 37 seconds. The monitor shows both the current outdoor temperature and the dew point temperature. You can display the temperature in Celsius (°C) or Fahrenheit (°F). Press OUT , then repeatedly press UNIT until ￿￿ or ￿￿ appears.

Notes:

•The monitor adjusts the unit of measure- ment (Celsius or Fahrenheit) you see for both the outdoor and indoor temperature readings simultaneously.

•You can add up to three extra sensors such as Cat. No. 63-1031 (not supplied, available at your local RadioShack store) to measure temperature readings in different locations.

Viewing and Resetting Max/Min Outdoor Temperature Records

To toggle between the current outdoor temperature view and the maximum or minimum outdoor temperature view (recorded since

Operation

21