NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual

3.Click Add to add a wireless device to the wireless access control list. The Wireless Card Access Setup dialog opens and displays a list of currently active wireless cards and their Ethernet MAC addresses.

Figure 3-7

4.If the desired computer appears in the Available Wireless Cards list, you can click the radio button of that computer to capture its MAC address; otherwise, you can manually enter a name and the MAC address of the authorized computer. You can usually find the MAC address on the bottom of the wireless device.

Tip: You can copy and paste the MAC addresses from the router’s Attached Devices menu into the MAC Address box of this menu. To do this, configure each wireless computer to obtain a wireless link to the router. The computer should then appear in the Attached Devices menu.

5.Click Add to add this wireless device to the Wireless Card Access List. The screen changes back to the list screen.

6.Repeat step 3 through step 5 for each additional device you want to add to the list.

Safeguarding Your Network

3-13

v1.2, January 2007

Page 41
Image 41
RadioLAN WNR834B user manual V1.2, January