Rain Dance EX1200 user manual Control Elements, Ultrabass PRO

ULTRABASS PRO EX1200

+If the unit is damaged, please do not return it to BEHRINGER, but notify your dealer and the shipping company immediately, otherwise claims for damage or replacement may not be granted. Shipping claims must be made by the consignee.

The BEHRINGER ULTRABASS PRO fits into one standard 19" rack unit of space. Please allow at least an additional 4" depth for the connectors on the back panel.

Be sure that there is enough space around the unit for cooling and please do not place the ULTRABASS PRO on high temperature devices such as power amplifiers etc. to avoid overheating.

+Before you connect your ULTRABASS PRO to the mains, please make sure that your local voltage matches the voltage required by the unit!

The fuse holder on the female mains connector has 3 triangular markers, with two of these triangles opposing each other. Your ULTRABASS PRO is set to the operating voltage printed next to these markers, and can be set to another voltage by turning the fuse holder by 180°. CAUTION: this instruction does not apply to export models exclusively designed, e.g. for 115 V operation!

The mains connection of the ULTRABASS PRO is made by using the enclosed mains cable and a standard IEC receptacle. It meets all of the international safety certification requirements.

+Please make sure that all units have a proper ground connection. For your own safety, never remove or disable the ground conductor of the unit or of the AC power cable.

As standard, the BEHRINGER ULTRABASS PRO is installed with electronically servo-balanced inputs and outputs. The circuit design features automatic hum rejection for balanced signals, permitting trouble-free operation even at the highest operating levels. Externally induced power-line hum, etc. is thus suppressed effectively. The automatic servo function recognizes the presence of unbalanced connectors and adjusts the nominal level internally to avoid level differences between the input and output signals (6 dB correction).

You will find additional information in chapter 4 “INSTALLATION”.

1.3 Control Elements

Fig. 1.1: The ULTRABASS PRO

The BEHRINGER ULTRABASS PRO provides 5 illuminated push-button switches, 6 rotary controls, and 4 level displays. The ULTRABASS PRO is designed as a stereo processor and is therefore not suited to process two different signals. The front of the ULTRABASS PRO is divided in three sections, each with its own function.

1. INTRODUCTION 7