PRODUCT RANGE: Coffee machine
MODEL:SILVIA
The label illustrated on the cover of this instruction manual corresponds to the identification label placed on the machine.
Label data (Fig.1)
1Manufacturer
2Model and version
3Voltage
4EC conformity mark (if required)
5Serial number
6Boiler data
7Machine total absorption
8Protection level
9Motor power
10Heating element power
11Frequency
12Conformity marks
13Year of manufacture
Symbols
Warning symbols. The instructions which refer to this symbol must be followed with great care in order to avoid accidents or damage to the machine.
This manual is an integral and essential part of the product and must be delivered to the user. The warnings contained in it must be read carefully, as they supply important indications related to the safety of installation, use and maintenance. Keep this manual for future reference.
1. GENERAL SAFETY RULES
Any traces of coffee are due to testing of the machine
The packing elements (plastic bags, expanded polystyrene, nails, cardboard, etc.) must not be left within the reach of children, as they are potential sources of danger.
Check that the data on the machine corresponds to those of the electrical supply network, before connecting the equipment.
It is advisable to unwind the supply cable for the whole length to avoid twisting or damages. Do not place the cable near water, liquids or heat sour- ces. The cable must not be damaged (should the cable be damaged, contact qualified personnel to replace it).
It is inadvisable to use adapters, multiple sockets and/or extensions. When their use is indispensa- ble, only products with certificate of quality (e.g. UL, etc.) may be used. Check that the voltage capacity limit indicated on the adapters excee- ds the absorption capacity (A = ampere) of the equipment.
When in doubt, request an accurate check of the connections by qualified personnel. The wiring system must comply with the following safety regulations:
-efficient grounding
-section of conductors suitable for absorption capacity
-efficient earth leakage protection circuit breaker.
Do not install the machine near heat sources (oven, cooking stove, fireplace, etc.) or in conditions in which the temperature may not go below 41°F. IT MUST BE PROTECTED AGAINST FREEZING CONDITIONS.
Do not leave the machine exposed to atmospheric agents (rain, sun, etc.) and do not install in damp rooms such as bathrooms.
In the event of parts replacement, request original spares from an authorized retailer or dealer.
Keep the packed machine in a dry place, not exposed to atmospheric agents and in conditions in which the temperature will fall below 41°F.
•Do not stack more than three items of the same kind. Do not place heavy items on the packa- ging.
Erroneous installation may cause damage to people and things for which the manufacturer cannot be considered responsible.
31