Rangemaster GLX390 Chimney assembly, Recirculation Version Air Outlet, Upper exhaust Chimney

RECIRCULATION VERSION AIR OUTLET

•Insert the connection extension pieces laterally 14.1 in connec- tion 15.

•Insert the Connector 15 into the Support bracket 7.3 and fix it with a screw.

•Make sure that the outlet of the extension pieces 14.1 is hori- zontally and vertically aligned with the chimney outlets.

•Connect the air outlet connection 15 to the hood body outlet

using either a flexible or rigid pipe ø 150 mm, the choice of which is left to the installer.

• Ensure that the activated charcoal filters have been inserted.

7.3	14.1
15
	ø 150

Chimney assembly

Upper exhaust Chimney

•Slightly widen the two sides of the upper chimney and hook them behind the brackets 7.2.1, making sure that they are well seated.

•Secure the sides to the brackets using the 4 screws 12c (2,9 x 9,5) supplied.

Lower exhaust Chimney

•Slightly widen the two sides of the chimney and hook them between the upper chimney and the wall, making sure that they are well seated.

•Fix the lower part laterally to the hood body using the 2 screws 12c (2,9 x 9,5) supplied.

ELECTRICAL CONNECTION

•Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm.

•Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan.

2.12.1

2

2.2 2.2

7.2.1

12c

12c

EN	8
	8