Rangemaster GLX390 Control Panel, Functions, 0/1 Light, Turns lighting on and off, 0/1 Motor on

USE

Control Panel

The hood can be switched on pushing directly onto the requested speed without firstly having to select 0/1 button.

KEY	LED	FUNCTIONS
L	0/1 Light	Turns lighting on and off.
T1	0/1 Motor on	First speed.
		When pressed for about 1 seconds the motor
		is switched off.

L

T1

Flashing	24h Changeover
	This is enabled by pressing and holding
	the button for approximately 5".It al-
	lows a suction level of 100 m3/h with a
	noise level of just 28dB(A).Can be en-
	abled at any speed, even with the hood
	turned off.To disable, press and hold
	the button for approximately 5".

T2

T3

T4

S1

T2	Speed	on	Second speed.
	Flashing		Delay (30')
			Press the button for approximately 2" to enable auto-
			matic shutdown with a 30' delay. Suitable to complete
			elimination of any residual smells. Can be enabled at
			any speed and is disabled by pressing the button T1
			briefly.
T3	Speed	on	Third speed.
T4	Speed	Fixed	Max. speed
		Flashing	Intensive speed.
			Suitable for the strongest cooking vapours and odours.
			The function becomes active when the button is
			pushed for about 2 seconds. After 10 minutes of func-
			tioning it turns off automatically. This function can be
			interrupted by means of pressing any of the buttons.
S1	Led	Fixed	Indicates that the Metal grease filters saturation alarm
			has been triggered, and the filters need to be washed.
			The alarm is triggered after 100 working hours. (Re-
			set; check the Maintenance-paragraph)
		Flashing	indicates that the activated charcoal odour filter
			saturation alarm has been triggered, and the filter has
			to be replaced; the metal grease filters must also be
			washed.	The activated charcoal odour filter is
			triggered after 200 working hours. (Activation and
			Reset; check the Maintenance-paragraph)

EN	9
	9