Replacing the fuser
The hood panel opening and closing mechanism is con- trolled by a starter motor which is activated by a fuser. This fuser works only on the starter motor. In case the fuser gets damaged when the panel is closed it is be necessary to manually unblock the panel. In this case proceed as follows:
•Remove the cover placed up on the left side.
•Press the releasing lever with the screwdriver as much as necessary to enable the manual opening of the panel.
•After having completely opened the panel remove the metal grease filters, as explained in the part concern- ing the filter cleaning.
•The fuser is placed up on the right side. Turn the fuser holder as indicated. Replace the fuser with one having the same features.
•Put the fuser holder and grease filters into their place again. Make sure that the hood functions correctly. In case the panel doesn’t work correctly it is necessary to contact an authorized technician.
If the fuser gets damaged being the panel open, it is suf- ficient to simply remove the grease filters and replace the fuser.
EN |
| 1 |
| 13 |
