Recycling Version Air Outlet, Electrical Connection

RECYCLING VERSION AIR OUTLET

To install the hood in recycling version, the optional charcoal filter kit must be purchased.

•Remove the chimney angle bracket.

•Screw the filter cover onto the air outlet, using four screws 12c (2.9 x 12.5).

•Fix the air outlet grid 8 on the recirculation air outlet using the 2 screws 12d (2,9 x 9,5) provided.

•Insert the connection extension pieces laterally 14.1 in connec- tion 15.

•Insert the Connector 15 into the Support bracket 7.3 and fix it with a screw.

•Make sure that the outlet of the extension pieces 14.1 is hori- zontally and vertically aligned with the chimney outlets.

•Connect the air outlet connection 15 to the hood body outlet

using either a flexible or rigid pipe ø 150 mm, the choice of which is left to the installer.

• Ensure that the activated charcoal filters have been inserted.

•Connect the hood to the mains supply.

•Open the upper panel by pressing the A-key (See Part “USE” ) for at least 2 seconds.

•Remove the metal filters (See Part “MAINTENANCE”) and make sure that the connector piece of the supply cable is cor- rectly inside the hood socket.

EN		7
EN		7