Rangemaster RDW945FI manual Washing Dishes

Fig.2-13			Washing Dishes
			Programme selection
			The most appropriate programme can be identified by
			comparing the type of crockery, cutlery, etc., as well as the
			amount and condition of food remains, with the details
			contained in Table 2-2, the wash cycle table.
			The corresponding programme sequence, duration and
			consumption details are shown in the right half of the table.
Fig.2-14			Example: Use the normal programme for dishes and utensils
		P	that are heavily soiled.
			Earn savings
			If only a small number of dishes have been loaded into the
	ArtNo.800-0229 - RDW459 - Operation 2		dishwasher, selecting a programme that operates at the next
			lowest temperature will usually be sufficient.
			Programme data
			The stated programme data are based on standard operating
			conditions. The values can vary considerably according to:
			•	Different amounts of dishes
			•	Temperature of mains water supply
			•	Pressure of mains water supply
			•	Ambient temperature
			•	Fluctuations in mains voltage
			•	Machine-related factors (e.g. temperature, water
				volume)
			Switching the dishwasher ON
			1.	Turn on the tap.
			2.	Open the door.
			3.	Set ON-OFF button to ON (Fig.2-13).
			4.	Press the programme button, the programme indicator
				illuminates (Fig.2-14).
			5.	If the door is closed, the programme indicator blinks
				and the programme will start automatically.
			End of programme
			Six beeps will indicate that the wash cycle has finished and all
			the programme indicators light.
			Switching the dishwasher OFF
			Several minutes after the programme has ended:
			1.	Open the door.
			2.	Set the ON-OFF button to OFF.
			3.	Remove dishes, etc. when they have cooled down.

8