5. Installation
Positioning the Dishwasher
The dishwasher should be aligned to the front of the adjacent cabinets, with allowance made for the door thickness. The dishwasher has water supply and drain hoses that can be positioned on either to the left or the right.
Before installing the dishwasher into a kitchen cabinet, holes must not be drilled into the sides, or door, to avoid compromising the performance and operation of the appliance.
A plastic
Connect up the cold water supply, the drain hose and the electrical connections (see below) then slide the dishwasher into the cabinet opening. Make sure the unit sits on the plastic skids supplied.
Cold Water Connection
Connect the water supply hose (supplied loose) to the cold water inlet at the rear. Connect the other end to a ¾“ BSP tap connector
IMPORTANT: If the water pipes are new or have not been used for an extended period of time, run the water for
a while to make sure that the water is clear and free of impurities BEFORE connecting to the dishwasher. Failure to carry out this precaution may lead to the water inlet becoming blocked and causing damage the appliance.
Drain Hose Connection
Connect the drain hose the water outlet. Insert the hose into a drainpipe with a minimum diameter of 40 mm, or let it run into a sink, making sure to avoid bending or crimping. If necessary, fit a siphon trap
WARNING! The connecting piece for the siphon trap
Fig.5-1
�������
��
Fig.5-2
��������������������
�����������
������
Fig.5-3
�����
����
Fig.5-4
������������������
��������������
�����
����
��������
15
