Rangemaster RGG77 manual Cleaning Your Hob, Essential information, Hotplate Burners, 2

3. Cleaning Your Hob

DocNo.041-0002 - Cleaning gas 5-element

Fig.3-1

Essential information

�

�

�

�

�

�

Allow the cooker to cool and then isolate the electricity supply before carrying out any thorough cleaning.

Never use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt. Do not mix different cleaning products – they may react together with hazardous results.

All parts of the hob can be cleaned with hot soapy water

– but take care that no surplus water seeps into the appliance.

Remember to switch on the electricity supply before re-using

ArtNo.316-0007 Gas burner

A – Cap, B – Head, C – Notch, D – Base, E – FSD, F – Electrode

Fig.3-2 �

�

�

ArtNo.316-0009 RG70 triple ring burner

�

A – Inner burner cap, B – Outer burner cap,

C – Burner head, D – Burner base

Fig.3-3

�

� ArtNo.316-0010 RG70 triple ring burner

the cooker.

We have developed a range of cleaning products that give maximum performance without damaging the hob surfaces. More information is available through the Cookware Collection brochure supplied with your cooker and our website, www. rangemaster.co.uk.

Regular cleaning is recommended. For easier cleaning, wipe away any spillages immediately.

Hotplate Burners

The burner heads and caps can be removed for cleaning. Make sure they are absolutely dry before replacing them.

The single ring burners

When refitting the burner head, ensure that the notch and opening lines up with the electrode in the base (Fig.3-1). Check that the burner head is level and that the cap is fitted centrally on the burner head.

The triple ring burner

The triple ring burner can also be taken apart for cleaning (Fig.3-2).

When reassembling the burner, turn over the burner head and note the shape of the central boss (Fig.3-3). Rotate the burner head until the central boss matches the shape of the burner base. Turn the head over and place it on the burner base.

Fit the 2 burner caps, making sure that they are seated properly.

A – Burner head (view from bottom), B – Burner base

5