replacing the light Bulb
Disconnect the appliance from the power supply
nn
before replacing the light bulb.
There is an interior light in the top of the refrigerator section.
Remove the bulb housing cover, by gently pulling the clip away from its slot
Change the present light bulb with a new one. The replacement bulb should not have a greater rating than 15 W.
Replace the light cover and after waiting five minutes, reconnect to the mains supply.
When not in use
If you are not using the appliance for an extended length of time, it is recommended that you switch off the electrical supply, empty any food out, clean the inside of the appliance and leave the door ajar.
This will save energy, and also prevent a build up of stale odours inside.
Fig.5-3
Bulb housing | Light bulb |
|
Bulb cover
17