Raymarine 81285_1 manual Using the PC program, Manually changing the settings

12

2.Connect a 15 m RF cable between LNB RHCP +13 V of the multiswitch and RF2 on the antenna baseplate.

3.Connect a 30 cm RF cable between To Multiswitch18V on the DiSEqC supplier and LHCP (+18V) on the multi-switch.

4.Connect a 3 m RF cable between From HD-ACUon the DiSEqC supplier and Receiver on the HD-ACU.

5.Connect a 30 cm RF cable between From multiswitch out on DiSEqC supplier and any OUT of the multi-switch.

6.Connect an RF cable between Master receiver on the DiSEqC supplier and the Master IRD.

With the system powered:

•Set the ACU to ON.

•The IRDs to OFF.

•The television to OFF.

7.Confirm that the antenna detects and tracks the DirecTV101 satellite.

8.Set the Master IRD to ON.

9.Set the television connected to the master IRD to ON.

The system can now be controlled using the Master IRD.

Power settings

HD-ACU and multiswitch

When using DirecTV with a multiswitch, the power setting for each of the satellites (DTV101, DTV119, and DTV110) should be set to AUTO. This is the default setting on the HD-ACU. If you need to change the settings, this can be achieved in one of two ways:

•Using the PC program on the Installation CD.

•Manually change the power setting.

Raymarine Satellite TV Systems

Using the PC program

1.Connect your PC to the HD-ACU.

2.Run the Installation CD.

3.Open the folder named DirecTV with multiswitch.

4.Enter Setup Mode.

5.Click View Data. The default settings are loaded.

6.Click Update antenna. The new settings are sent to the antenna.

7.Click Restart. The antenna is initialized using the new power settings.

Manually changing the settings

	SETUP MODE?		1.	Press YES to enter set up mode.
YES		NO
		D7973 1
	SET SAT PAIR?		2.	Press NEXT twice to enter Edit Sat
PREV	YES	NEXT		Info menu.
		D7974 1
EDIT SAT INFO?			3.	Press YES to enter edit menu.
PREV	YES	NEXT	4.	Press NEXT until the power
				supplying method screen is
		1
		D7983		reached.