Raymarine 81285_1 manual HD-ACU with multiswitch and DiSEqC supplier

13

		5. Select the power supplying method
POWER : AUTO		** to the LNB. AUTO is
PREV SELECT	NEXT	recommended.
		PREV - shows previous method.
	1
	D7995_	SELECT - set the displayed method.
		NEXT - shows next method.
SAVE?		6. Press YES to accept the data.
YES	NO	Press NO to cancel and return to
		main set up mode.
	1
	D7977

6.Click Update antenna. The new settings are sent to the antenna.

7.Click Restart. The antenna is initialized using the new power settings.

Manually changing the settings

SETUP MODE?	1. Press YES to enter set up mode.
YES	NO
	D7973 1

HD-ACU with multiswitch and DiSEqC supplier

Power settings

When using DirecTV with a multiswitch and DiSEqC supplier, the power setting for each of the satellites (DTV101, DTV119, and DTV110) should be set to 18 V only. This is not the default setting on theHD-ACU. If you need to change the settings, this can be achieved in one of two ways:

•Using the PC program on the Installation CD.

•Manually change the power setting.

Using the PC program

1.Connect your PC to the HD-ACU.

2.Run the Installation CD.

3.Open the folder named DirecTV with multiswitch and DiSEqC supplier.

4.Enter Setup Mode.

5.Click View Data. The default settings are loaded.

SET SAT PAIR?

PREV YES NEXT

D7974_1

EDIT SAT INFO?

PREV YES NEXT

D7983_1

2.Press NEXT twice to enter Edit Sat Info menu.

3.Press YES to enter edit menu.

4.Press NEXT until the power supplying method screen is reached.