Razor 13111290 Replacing the Spark Cartridge, Using the Spark Bar, Battery Care and Disposal

Repair and Maintenance

qReplacing the Spark Cartridge

Friction during sparking will eventually wear out the replaceable cartridge and cause the scooter to stop making sparks. Worn out cartridges must be replaced.

A

B

1 Using your thumbs, press tabs	2 Place a new cartridge in back of the bracket mak-
(A & B) on both sides of the car-	ing sure to align the slots on the cartridge with the
tridge to release from the bracket.	two legs of the bracket and slide cartridge forward
Slide cartridge away from you and	until you hear a click and the thumb tabs are locked
remove from bracket.	in place.

qUsing the Spark Bar

When riding, place ball of foot on the Spark Bar and gradually apply pressure. Only use enough pressure to cause sparking action. Do not engage the Spark Bar for extended or continuous periods of use.

qBattery Care and Disposal

Do not store the battery in temperatures above 75° F (23.8° C) or below -10° F (-23.3° C).

CONTAINS SEALED LEAD ACID BATTERIES. BATTERIES MUST BE RECYCLED.

Disposal: Your Razor product uses sealed lead-acid batteries which must be recycled or disposed of in an environmentally safe manner. Do not dispose of a lead-acid battery in a fire. The battery may explode or leak. Do not dispose of a lead-acid battery in your regular household trash. The incineration, land filling or mixing of sealed lead- acid batteries with household trash is prohibited by law in most areas. Return exhausted batteries to a federal or state approved lead-acid battery recycler or a local seller of automotive batteries. If you live in Florida or Minnesota, it is prohibited by law to throw away lead-acid batteries in the municipal waste stream.

qCharger

The charger supplied with the electric scooter should be regularly examined for damage to the cord, plug, enclosure and other parts and in the event of such damage, the product must not be charged until it has been repaired or replaced.

Use ONLY with the recommended charger.

qWheels

Wheels and drive system are subject to normal wear and tear. It is the responsibility of the user to periodically inspect wheels for excess wear and adjust and replace drive train components as required.

qReplacement Parts

The most frequently requested replacement parts are available for purchase at some Razor retail partners. For the complete selection of replacement parts visit www.razor.com/shop.

qRepair Centers

For a list of authorized Razor repair centers:

•Check online at www.razor.com.

•Call 866-467-2967 for the center nearest you.

WARNING: Do not attempt to replace cartridge immediately after riding as cartridge will be hot. Handle only when cool.

WARNING: Keep fingers clear of Spark Bar hinge .

WARNING: Applying too much pressure on the Spark Bar may cause loss of control.

NOTE: Sparks and Spark cartridge life will vary based on the amount of pressure applied to the Spark Bar, the length of time pressure is applied and the smoothness of the riding surface.

WARNING: If a battery leak develops, avoid contact with the leaking acid and place the damaged battery in a plastic bag. Refer to the disposal instructions at left. If acid comes into contact with skin or eyes, flush with cool water for at least 15 minutes and contact a physician.

WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. Wash your hands after handling.

Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time.

8