Razor E200 Front Tire Replacement, Replace the chain guard, Placement wheel, Clockwise

Repair and Maintenance

10 Install the axle adjusters and axle nuts. Tighten until they just barely hold the hardware in place.

13 Replace the chain guard.

11Tighten both axle adjusters the same number of turns to fine- tune the tension on the chain and center the wheel.

12 Tighten the brake housing anchor securely. Test ride and check. Readjust as needed.

qFront Tire Replacement

Tools required: two (2) 17mm wrenches and a flathead screwdriver.

8-1

	8-3
	8-2
	8-2
	8-6
	8-5
	8-1
	8-2
	8-2
1 Using two 17mm wrenches,	2 Remove wheel and install re-
loosen the front axle bolts by	placement wheel.
turning the wrenches counter
clockwise.

7

Right Side (Throttle)

8-3 - (Short) spacer

8-2 - Washer

8-2 - Washer

8-1 - 17mm locknut

Middle

8-6 - Front axle bolt

Left Side (Brake)

8-5 - (Long) spacer

8-2 - Washer

8-2 - Washer

8-1 - 17mm locknut