Razor MX650, MX500 Before You Begin, Estimated Assembly and Set-Up Time, Required Tools

Before You Begin

Remove contents from box. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping. Because the Dirt Rocket is 95 percent assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.

MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY MAINTENANCE PROCEDURES.

Estimated Assembly and Set-Up Time

Razor recommends assembly by an adult.

Allow up to 30 minutes for assembly.

Allow up to 18 hours for initial charge (see page 3 for charging information).

	Charger
	Charger
	Port
	Charger
Brake Lever	Plug

Front Fork

Speed Control

Brake Lever

Drive

Chain

WARNING:

DO NOT USE NON-RAZOR PRODUCTS WITH YOUR RAZOR DIRT ROCKET. The Dirt Rocket has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may or may not be compatible.

Required Tools

2.5mm, 5mm and 6mm	10mm, 14mm and 17mm	Screwdriver	Spoke tightener	Bicycle-style tire pump
key wrenches	wrenches	(Included)	(Included)	for Schrader valve tires,
(Included)	(Included)			with pressure gauge
	19mm wrench			(Not Included)
	(Not Included)

Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll-free at 866-467-2967Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

2