Repair and Maintenance
qChain and Tire Replacement
Tools required: Phillips screwdriver and two (2) 19mm wrenches.
1Loosen screw and remove chain guard.
4Install the new chain or wheel by slipping the chain around the axle. Slide the axle into the slots on the frame. Slide the chain tensioner down and maneuver the chain onto the rear sprocket and front sprocket.
2Using two 19mm wrenches, loosen both axle nuts.
5
3Push the chain tensioner down to loosen the chain and remove the chain from the wheel sprocket and
motor sprocket. Push and remove the wheel downward.
Note: Your hands will get greasy doing this.
Note: the arrangement of the hardware sequence:
Right Side (Throttle)
Nut
Washer
Spacer
Left Side (Brake)
Nut
Washer
Spacer
qReplacing the Fuse
3 Fuse boxes | Fuse checking cavity | Amperage |
| ||
|
| number |
WARNING:
To prevent shock, please follow the instructions accordingly and do not skip any steps.
1 Remove the seat fairing to lo- cate the 3 fuse boxes attached to the batteries.
2Check all 3 fuses to see if the fuse(s) have burnt out. If the fuse(s) is(are) damaged, open the fuse cover.
6
3 Remove any fuse that is damaged or burnt out and replace with a new one of equal amperage.
Note: Amperage is located on top of fuse.
