Playing Discs

DVD Basics

Regional Coding

The DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. This unit’s code is region 1. Discs with other regional codes can’t be played in this unit.

Using Different Menus

Each disc is programmed with different features. There are two separate menu systems that you can use to access DVD features: the disc’s menu and the TV/DVD’s DVD menu (separate from the TV’s menu system). Remember that a feature only works if the disc was programmed with that feature. For example, if you choose subtitles, the subtitles only appear if the disc was created with subtitles. The DVD menu system is explained on page 16.

The Disc menu – The disc menu is part of each disc and is separate from the DVD’s menu system. The contents of each disc’s menu vary according to how the disc was created and what features are included. Sometimes a disc’s menu appears automatically when you insert the disc, or you can access it by pressing the MENU button.

Types of Discs Your DVD Will Play

DVD discs – Contain video.

Audio discs – Contain musical or sound content only (such as CD, CD-R, CD-RW).

mp3 discs – Contain audio files (for example, a CD-R with downloaded mp3 files).

Picture CDs, JPEG files.

Before you load a disc, make sure that it is compatible with the player. Note that the following discs CANNOT be used with this player:

Laserdisc

CD-I, CD-ROM, DVD-ROM

MiniDisc

CD-G discs play audio only, not graphics

To Load and Play a Disc

1.Press the DVD button on the remote to make sure the unit is in the DVD mode.

2.Press the open/close button on the remote to open the disc tray. Place a disc gently into the tray with the disc’s label facing up (double-sided discs have content on both sides, so you can place either side up).

3.Press the OPEN/CLOSE button again to close the disc tray.

The player reads the disc’s table of contents, and then one of following happens depending on how the disc was programmed:

No disc menu appears, a screen saver is displayed.

The disc menu appears.

The disc menu appears on the screen when you press PLAY/PAUSE.

The disc starts playing automatically.

If no picture or screen saver is displayed, press the DVD button to put the player in DVD mode.

14

Playing Discs

Page 16
Image 16
RCA 13R400TD manual Playing Discs, DVD Basics, Regional Coding, Using Different Menus, Types of Discs Your DVD Will Play