AUTO CLOCK SETTING
The Auto Clock function will automatically set the
AUTO CLOCK SETTING
1Connect the Antenna or Cable system.
•If you use a cable box, turn it on.
2Plug the AC Power cord to the AC outlet.
3Make sure the TV/VCR is turned off.
•If you press the POWER button, the Auto Clock set is not effective.
4Wait at least three minutes and press the POWER button.
5Press the CALL button to check the clock on the screen.
6If the clock is not set, check the Antenna condition. The Auto Clock may not function properly if the reception condition is not good.
4Press the SET + or – button to select your time zone,
then press the ENTER button. |
| ||
ATLANTIC | : | GMT – 4 | hours |
|
| (GMT: Greenwich Mean Time) | |
EASTERN | : | GMT – 5 | hours |
CENTRAL | : | GMT – 6 | hours |
MOUNTAIN | : | GMT – 7 | hours |
PACIFIC | : | GMT – 8 | hours |
ALASKA | : | GMT – 9 | hours |
HAWAII | : | GMT – 10 hours | |
AUTO | : | AUTO SET |
|
5 Press the MENU button twice to return to the normal screen.
NOTES: • To be able to select the standard time, the clock must first be set by “AUTO CLOCK” once.
•If you live in Newfoundland and the Auto Clock does not function properly, set the AUTO CLOCK menu option to OFF and set the clock manually.
AUTO CLOCK ADJUSTMENT
The Auto Clock Adjustment will be performed at 12:00 PM everyday if you turn off the TV/VCR.
DAYLIGHT SAVING TIME SETTING
You can set the Daylight saving time automatically or manually.
•If you use a cable box and you want Auto Clock adjust- ment to be performed, the cable box must be left on.
•The Auto Clock Adjustment is not effective when there is a difference of more than 5 minutes exists between the
TO SET AUTO CLOCK TO OFF
When shipped from factory the AUTO CLOCK option is set to ON.
But if you do not want Auto Clock set (Adjustment):
1Turn on the TV/VCR.
2Press the MENU button.
3Press the SET + or – button to select the SYSTEM
4Press the SET + or – button to select the AUTO CLOCK option.
5Press the ENTER button to select OFF.
6Press the MENU button repeatedly to return to the normal screen.
•When the AUTO CLOCK is set to OFF, the Auto Clock adjustment does not function.
•Set the clock manually (see page 13).
1Press the MENU button. Press the SET + or – button to select the SYSTEM
2Press the SET + or – button to select the DAYLIGHT SAVING TIME option, then press the ENTER button.
3Press the SET + or – button to select one of the options, then press the ENTER button. Press the MENU button until the MENU screen is cleared.
ON: for manual setting (forward one hour)
OFF: for manual setting (back one hour)
AUTO: for automatic setting (read XDS in the signal)
M E N U
TIMER REC SET
TV
CH
AUTO REPEAT ON 
OFF 
SYSTEM
SYSTEM
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
AUTO CLOCK 
ON OFF
STANDARD TIME 
DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME
ON
OFF
AUTO
TO SET STANDARD TIME
In the rare event that you live within broadcast range of two stations in two different time zones, the TV/VCR may recognize the wrong station for the Auto Clock set. To correct the situation:
1Press the MENU button.
2Press the SET + or – button to select the SYSTEM
3Press the SET + or – button to select the STANDARD TIME option, then Press the ENTER button.
When you want to set the Daylight Saving Time manually, on the first Sunday in April you set to “ON”, and on the last Sunday in October you set to “OFF”.
NOTES: • When shipped from factory, the DAYLIGHT SAVING TIME option is set to AUTO position.
•When the clock is not set, Daylight Saving Time setting is not available.
•When there is no Daylight Saving Time in your area, always select OFF position in step 3.
12
