LOCATION OF CONTROLS
FRONT | REAR |
1 | VIDEO |
| L |
(MONO) AUDIO
UHF/ | R |
VHF | OUT LINE1 |
| 2 | 3 | 4 | 5 |
| 6 | 7 | 1516 17 | 18 |
|
|
|
|
|
|
|
| ||
8 | 9 |
| 10 |
| 11 | 12 | 13 | 14 |
|
DESCRIPTION OF CONTROLS
FRONT:
1.Cassette Loading Slot - To insert or remove a video tape.
2.POWER Button - Press to turn the TV/VCR on or off.
3.T.REC Indicator - Lights when the unit is in the Timer Record Mode.
4.REC/OTR Indicator - Lights up when the TV/VCR is recording.
5.CH ▲ / ▼ Buttons - Press to select a channel for viewing or recording.
6.3/5 (STOP/EJECT) Button - Press once to stop the tape in any mode. Press again to eject the tape.
7.9 (Forward) Button - In the Stop mode,
this button rapidly winds the tape forward. In the Play mode, this button activates forward search.
8.Remote Sensor - Signals from the Remote Control are received here.
9.REC/OTR Button - Press once to start normal recording. Additional presses activate
10.VOL ▲ / ▼ Buttons - Press to raise or lower the level of the sound.
11.1 (PLAY) Button - Press to play a prerecorded tape.
12.8 (Reverse) Button - In the Stop mode, this button rapidly winds the tape backwards. In the Play mode, this button activates reverse search.
13.AUDIO (L/R)/VIDEO IN (LINE 2) Jacks - Audio and video signal cables from an external source can be connected here.
14.PHONES Jack - Plug monaural headphones or an earphone with an 1/8" miniplug into this jack for private listening.
REAR:
15.UHF/VHF Antenna Jack - Connect the 75 ohm coaxial cable from the antenna or Cable TV service to this jack.
16.AUDIO (L/R)/VIDEO OUT Jacks - Used to output audio and video signals to a TV, amplifier or VCR.
17.AUDIO (L/R)/VIDEO IN (LINE 1) Jacks - Audio and video signal cables from an external source can be connected here.
18.AC Power Cord - Connect to a 120V, 60Hz outlet.
7
