![](/images/new-backgrounds/1281105/28110521x1.webp)
CABLE TV CONNECTIONS
This TV/VCR has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
FOR SUBSCRIBERS WITH BASIC CABLE TV SERVICE
For basic cable service not requiring a Converter/Descrambler box, connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the TV/VCR.
Antenna Jack
75ohm Coaxial Cable
FOR SUBSCRIBERS WITH SCRAMBLED CABLE TV SERVICE
If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV/VCR. Follow the connections shown below. Set the TV/VCR to the output channel of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/ Descrambler box to select channels.
Incoming 75 ohm | Antenna Jack |
CATV cable | 75 ohm Cable to TV/VCR |
Converter/Descrambler
FOR SUBSCRIBERS WITH BASIC CABLE TV SERVICE AND SCRAMBLED PREMIUM CHANNELS
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the use of a Converter/Descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the Cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B" position, you can directly tune any nonscrambled channels on your TV/VCR. With the switch in the "A" position, tune your TV/VCR to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/ Descrambler box to tune scrambled channels.
Incoming | Converter/Descrambler |
|
| |
75 ohm |
|
| 75 ohm cable | Antenna Jack |
CATV cable |
|
| to TV/VCR | |
Splitter | A/B Switch A |
| ||
| B |
|
SETTING THE LANGUAGE
This TV/VCR can display the on screen language in English, Spanish or French.
1 Press the MENU button. |
| M E N U |
Press the SET + or – button to |
| TIMER REC SET |
| TV | |
| ||
select the SYSTEM |
| CH |
| ||
| AUTO REPEAT ON OFF | |
| ||
option, then press the ENTER |
| SYSTEM |
| ||
| ||
|
| |
button. |
2Press the SET + or – button to select the LANGUAGE option, then press the ENTER button.
3Press the SET + or – button to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press the ENTER button.
4Press the MENU button until the MENU screen is cleared.
SYSTEM
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
AUTO CLOCK
ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
11