RCA 24F610TD manual Using the Remote Control, Programming the Remote to Operate Other Components

Using the Remote Control

PRESETS In TV mode, picture options are reset to original factory settings.

RECORD In VCR mode, press to program your VCR to record a program.

REVERSE In DVD mode, press REVERSE to go backwards on a disc.

SEARCH In VCR mode, accesses Index Search feature.

SKIP Press once before changing channels and the TV will wait 30 seconds before returning to the original channel. Press repeatedly to add more time. In DVD mode, displays the Info Display with the Angle icon highlighted.

SPEED In VCR mode, selects a recording speed.

STOP In DVD mode, stops playing the disc and displays the DVDÕs menu system.

TV Turns on the TV and puts the remote in TV mode. Also displays current status.

VCR Puts the remote in VCR mode and, if auto tuning is enabled, will turn on the TV and tune to the correct video input channel.

VOL – or VOL + Decreases or increases the TVÕs volume.

ZOOM In DVD mode, zooms in on the picture.

Using the INPUT Button

Use the INPUT button to scroll through the available video input channels and view components you have connected to the TV/DVD.

1.Make sure the component you want to view is turned ON.

2.Press INPUT to tune to an available video input source and view the component.

3.To return to the previous channel, continue pressing INPUT.

DVD

ONOFF

Programming the Remote to Operate Other Components

VCR button

CLEAR button

REVERSE and PLAY buttons

VCR TV

VOL		CH
MUTE	GO BACK
CLEAR		MENU
	OK
PRESETS
DISC MENU		SKIP
CC		INFO
GUIDE
1	2	3
4	5	6
7	8	9
INPUT	0	ANTENNA

REVERSE	PLAY	FORWARD
RECORD	STOP	PAUSE

AGAIN ZOOM OPEN CLOSE

SPEED SEARCH

ON•OFF

button The universal remote can be programmed to operate most brands of remote controllable components. The remote is already programmed to operate most RCA, GE, and Proscan components.

Notes: The TV and DVD buttons can’t be programmed on this remote.

The remote may not be compatible with all brands and models of components. It also may not operate all functions of the remote that came with your component.

Find Out If You Need to Program the Remote

To determine whether the universal remote needs to be programmed for your component, turn the component ON. For example, to program the remote for a VCR, turn on the VCR. Point the remote at the VCR, and press the VCR button. Then press ON¥OFF or CH + (channel up) or CH Ð (channel down) to see if the VCR responds to the remote commands. If

STOP the component does not respond, the remote needs to be button programmed.

YouÕll use these buttons when programming the remote.

10 Graphics contained within this publication are for representation only. Chapter 2