RCA 24F610TD manual Password menu appears, Remote Control Doesn’t Work

Models: 24F610TD

1 64
Download 64 pages 36.01 Kb
Page 51
Image 51

Other Information

Noisy stereo reception

¥The station might be weak. Access the SOUND menu, highlight Sound Type and then choose Mono.

No picture, no sound but TV is on

¥The channel might be empty Ñ change channels.

¥If youÕre watching your VCR and itÕs connected with coaxial cable to the TV/ANT jack, tune the TV to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Also check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR).

Sound okay, picture poor

¥Check antenna connections. Make sure all of the cables are firmly connected to the jacks.

¥Try adjusting sharpness function to improve weak signals. Go to page 44 for more instructions.

PASSWORD menu appears

¥KidPass option is activated and you try to reset the time.

¥You turn the TV on after KidPass shut off the TV.

Black box appears on the screen

¥Closed-captioning might be on. Check the Closed-Caption Display control panel in the Screen menu. Go to page 45 for more instructions.

The Remote Control Doesn’t Work

¥Something might be between the remote and the remote sensor on the component. Make sure there is a clear path.

¥Maybe the remote isnÕt aimed directly at the component (TV or VCR) that youÕre trying to operate.

¥The remote might be in the wrong mode. To be in DVD mode, press DVD on the remote before you press any other buttons. If youÕre operating the TV, press the TV button first.

¥Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the remote. (Note, if you remove the batteries, you may have to reprogram the remote to operate other components.)

¥You might need to reset the remote: remove batteries and press the number 1 button for at least 60 seconds. Release the 1 button, replace the batteries, and (if necessary) program the remote again.

Problems with V-Chip/Parental Controls

The rating limits don’t work

¥You must lock the settings. Go to the TV MAIN MENU (press MENU on your remote), select Parental Controls (press 6 on your remote), select Lock Parental Controls (press 6 on your remote).

Chapter 7

Graphics contained within this publication are for representation only.

49

Page 51
Image 51
RCA 24F610TD manual Password menu appears, Remote Control Doesn’t Work, Problems with V-Chip/Parental Controls