Connections & Set Up
RINGER VOLUME RINGER TYPE
RINGER VOLUME
MIDDLE
Set Up
1.When the unit is in READY mode, press the MENU/OK button to display the program set up menu.
2.Press the or button to scroll through the set up menu selections. They are as follows:
RINGER VOLUME (off, low, middle, high) The default setting is middle.
RINGER TYPE (1 / 2 / 3 / 4) The default setting is type 1.
HOLD REMINDER TIME (Off / 15 / 30 / 45 / 60 sec) The default setting is 30 sec.
FLASH TIME Programming (100 / 200 / 300 / 400 / 500 / 600 / 700 / 800 / 900msec) The default setting is 600msec.
LCD CONTRAST ADJUSTMENT (1 / 2 / 3 / 4 / 5) The default setting is 3.
RESET
3.Press the FLASH/EDIT button. The current setting shows in the display.
4.Press the or to scroll through the menu selections then press MENU/OK to accept the setting and return to the setup menu.
Ringer Volume
There are four ringer volume levels (OFF, LOW, MIDDLE, HIGH), and the default level is middle.
1.In standby mode, press the MENU/OK button to go to program setup.
2.Press or to control the pointer to point to RINGER VOLUME, then press FLASH/EDIT to select.
3.Press the button to increase the ringer volume, or press the button to decrease ringer volume. The volume level on the display changes accordingly and the corresponding ring tone is generated.
4.Press MENU/OK button to save the selected ringer type . You will hear a long beep and the display shows SAVED, then returns to the previous menu.
8
