Connections & Set Up
RINGER VOLUME 
RINGER TYPE
RINGER TYPE
1
RINGER TYPE
4
RINGER VOLUME 
RINGER TYPE
HOLD REMINDER
FLASH TIME
HOLD REMINDER
30 SEC 
HOLD REMINDER
OFF 
HOLD REMINDER
FLASH TIME
Ringer Type
You may select one of four ringer tones for incoming calls. The default ringer is type 1.
1.In standby mode, press the MENU/OK button to go to program setup.
2.Press the or button to move the pointer to RINGER TYPE.
3.Press the FLASH/EDIT button to select
RINGER TYPE.
4.Press the or button to change the selection. For example, move the pointer to 4 to select ring type 4. The corresponding ring tone is generated.
5.Press the MENU/OK button to save the selected ringer type . You will hear a long beep, and the display shows SAVED, then returns to the previous menu.
Hold Reminder Time
You may set the Hold Reminder Time to generate three short beeps to remind you that a call is on hold. The default is 30 seconds.
1.In standby mode, press the MENU/OK button.
2.Press the or button to move the arrow to HOLD REMINDER.
3.Press the FLASH/EDIT button to go to the programming mode .
4.Press the or button to select the hold reminder time (Off / 15 / 30 / 45 / 60 sec).
5.Press the MENU/OK button to confirm. You will hear a long beep and the display shows SAVED, then returns to the previous menu.
Note: If you choose not to use the HOLD REMINDER option, press the or button to select OFF.
Flash Time
You may program the FLASH time for your service need. The default is 600msec.
1.In standby mode, press the MENU/OK button.
2.Press the or button to go to FLASH TIME. The display shows:
9
