Connections & Setup

Installing the Phone

Installing the Handset Battery

NOTE: You must connect the handset battery before use.

CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Nickel-metal Hydride (Ni-MH) battery model 5-2734, which is compatible with this unit.

1.Locate battery which is packaged inside a plastic bag and is separate from the handset.

2.Locate the battery compartment on the back of the handset.

3.Plug the battery pack cord into the jack inside the compartment.

NOTE: To ensure proper battery installation, the connector is keyed and can be inserted only one way.

PRESS DOWN FIRMLY

BATTERY

BLACK WIRE

RED WIRE

4.Insert the battery pack.

5.Close the battery compartment by placing the handset back cover slightly higher than the handset and then sliding the cover down into position.

11

Page 11
Image 11
RCA 25250 manual Installing the Phone, Installing the Handset Battery