TROUBLESHOOTING TIPS
TELEPHONE
Problem | Solution |
No dial tone | • Check installation: |
| — Is the base power cord connected to a working |
| outlet? |
| — Is the IN USE light on? |
| — Is the telephone line cord connected to the base |
| unit and the wall jack? |
| • Disconnect the base from the wall jack and connect |
| another phone to the same jack. If there is no dial tone |
| in the second phone, the problem might be your |
| wiring or local service. |
| • Is the handset out of range of the base? |
| • Make sure the battery is properly charged (12 hours). |
| • Is the battery pack installed correctly? |
| • Did the handset beep when you pressed the TALK |
| button? Did the CHARGE/ IN USE indicator come on? |
| The battery may need to be charged. |
|
|
Dial tone is OK, but can't dial out
•Make sure the TONE/PULSE setting is programmed correctly.
Handset does not ring • Make sure the RINGER switch on the handset is turned to ON.
•You may have too many extension phones on your line. Try unplugging some phones.
•See solutions for “No dial tone.”
25
