RCA 29993 manual Installation

INSTALLATION

1.Connect the telephone line cord to the LINE jack on the back of the unit and then into a modular wall jack.

2.Connect the telephone line cord from your telephone into the jack on the back of the answerer marked PHONE. (You don’t have to connect your telephone in order for the answerer to record incoming messages.)

3.Connect the power supply into the POWER 9V AC jack on the back of the answerer. Plug the other end into an AC power outlet. The unit announces, “Answer on, greeting one” and indicates the status on the display. The time is also shown on the display as 12:00.

1

2

3

NOTE: After power is supplied to the unit, it performs a self-test. If the self-test fails, the unit displays FLASH ERROR. If this occurs, the unit needs to be serviced.

CAUTION: Only use the Thomson 5-4077 power supply that was packed with this unit. Using other power supplies may damage the unit

6