RCA 32F650T manual Using the Remote Control, Programming the Remote to Operate Other Components

Using the Remote Control

GUIDE If youÕre operating another component that has an on-screen program guide, this button accesses the on-screen guide.

REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides transport control for some remote-controllable VCRs, DVD players, and CD players.

SAT•CAB Puts the remote in SAT¥CAB (SAT¥CABLE) mode and, if auto tuning is enabled, will turn on the TV and tune to the correct video input channel.

VCR Puts the remote in VCR mode and, if auto tuning is enabled, will turn on the TV and tune to the correct video input channel.

Using the INPUT Button

Use the INPUT button to scroll through the available video input channels and view components you have connected to the TV.

1.Press TV to place the remote in TV mode. Make sure the component you want to view is turned ON.

2.Press INPUT to tune to an available video input source and view the component.

3.To return to the previous channel, continue pressing INPUT.

			ON-OFF	ON•OFF
		TV		button
	DVD	VCR
DVD	SAT•CAB	AUX	AUDIO
and VCR
buttons				SAT•CAB,
				AUX, and
	CC		INFO	AUDIO
	CLEAR		MENU	buttons
		OK
CLEAR	PRESETS		SKIP
button
		GUIDE
	VOL		CH
	MUTE GO
		BACK
	1	2	3
	4	5	6
	7	8	9
	INPUT	0	ANTENNA
	REVERSE	PLAY	FORWARD
REVERSE	RECORD	STOP	PAUSE
and PLAY
buttons				STOP
				button

YouÕll use these buttons when programming the remote.

Programming the Remote to Operate Other Components

The universal remote can be programmed to operate most brands of remote controllable components. The remote is already programmed to operate most RCA, GE, and Proscan components.

Also, the AUX button can be programmed to operate most brands of an additional remote-controllable component.

Notes: The TV button can’t be programmed on this remote.

The remote may not be compatible with all brands and models of components. It also may not operate all functions of the remote that came with your component.

Find Out If You Need to Program the Remote

To determine whether the universal remote needs to be programmed for your component, turn the component ON. For example, to program the remote for a VCR, turn on the VCR. Point the remote at the VCR, and press the VCR button. Then press ON¥OFF or CH + (channel up) or CH Ð (channel down) to see if the VCR responds to the remote commands. If the component does not respond, the remote needs to be programmed.

Programming the Remote

There are two ways to program the remote control:

¥automatic code search

¥direct entry

10 Graphics contained within this publication are for representation only. Chapter 2