RCA 32F650T manual Button Descriptions for TV Mode, Button Descriptions for Other Modes, Indicator

Chapter 2: Using the Remote Control

Indicator

		ON-OFF
	TV
DVD	VCR
SAT•CAB	AUX	AUDIO
CC		INFO
CLEAR		MENU
	OK
PRESETS		SKIP
	GUIDE
VOL		CH
MUTE GO
	BACK
1	2	3
4	5	6
7	8	9
INPUT	0	ANTENNA

REVERSE PLAY FORWARD

RECORD STOP PAUSE

Button Descriptions for TV Mode

Arrows Used to point to different items in the TV menu and to adjust the menu controls.

Indicator Indicates the programming mode when programming the remote to control components. Lights when you press a valid button on the remote. Flickers when a button is pressed and the batteries are low.

(0-9) Number Buttons Enter channel numbers and time settings directly through the remote control.

To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press the two digits and expect a few seconds delay. This is in case you want to enter a third digit.

CCToggles closed captioning on and off.

CH + or CH - Scans up or down through the current channel list. Press once to change the channel up or down; press and hold to continue changing channels.

CLEAR Removes any menu or display from the screen and returns you to normal viewing.

GO BACK Returns you to the previous channel.

INFO Brings up channel banner; press again to clear the screen.

INPUT Toggles through the available input sources (VID1/SVID1, VID2/CVID2, CVID3, FRNT, and current channel).

MENU Brings up the Main menu.

MUTE Reduces the TVÕs volume to its minimum level. Press again to restore the volume.

OK When in the menu system, selects highlighted items.

ON•OFF When in TV mode, turns the TV on and off. If in another mode (VCR, DVD, SAT¥CAB, etc.), will turn the component on and off.

PRESETS Picture options are reset to original factory settings.

SKIP Press once before changing channels and the TV will go back to the original channel after 30 seconds. Press repeatedly to add more time.

TV Turns on the TV and puts the remote in TV mode. Also displays current status.

VOL – or VOL + Decreases or increases the TVÕs volume.

Button Descriptions for Other Modes

AUDIO Places the remote in audio mode to operate a component (such as an audio receiver, or amplifier receiver) that youÕve programmed to work with this button.

AUX Puts the remote in AUX mode. Can also be programmed to operate most brands of an additional remote-controllable component.

ANTENNA In VCR mode, functions as a TV/VCR button. In SAT¥CAB mode, functions as a TV/receiver button.

DVD Puts the remote in DVD mode and, if auto tuning is enabled, will turn on the TV and tune to the correct video input channel.

Chapter 2 Graphics contained within this publication are for representation only. 9