Chapter 5: Other Information
Troubleshooting
Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.
Note: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call
TV Problems
TV won’t turn on
¥Press the TV button.
¥Make sure the TV is plugged in.
¥Check the wall receptacle (or extension cord) to make sure it is ÒliveÓ by plugging in something else.
¥Something might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV turns on, check the remote control solutions on page 26.
¥The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Lock Fr. Panel in the PARENTAL CONTROL menu and press OK (box wonÕt have check mark).
Buttons don’t work
¥If youÕre using the remote control, press the TV button first to make sure the remote is in TV mode.
¥The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Lock Fr. Panel in the PARENTAL CONTROL menu and press OK (box wonÕt have check mark).
¥Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.
TV turns off unexpectedly
¥Sleep timer may have been activated. Go to page 24 for instructions.
¥KidPass may have been activated. Go to page 21 for instructions.
¥
¥Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn on again. If this happens frequently, the voltage in your house may be abnormally high or low.
¥Unplug TV. Wait five minutes. Plug it in again.
TV turns on unexpectedly
¥
¥You might have pressed CH+, CH- or OK on the remote accidentally.
Blank screen
¥Make sure the component connected to the TV is turned on.
¥Try another channel.
No sound, picture okay
¥Maybe the sound is muted. Try pressing the volume up button to restore sound.
¥If using
¥Make sure the Int. Speakers option in the SOUND menu is turned on.
Can’t select certain channel
¥Channel may be blocked or not approved through the
¥If using a VCR, make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR).
Chapter 5 | Graphics contained within this publication are for representation only. | 25 |
