Chapter 3
Internet Connectivity Dial-In Clients
E-DOC-CTC-20050429-0098 v1.0
30
Starting a broadband
Internet session
Proceed as follows:
1Click the Internet Connect dockling.
2The following window appears:
Make sure Built-in Ethernet is selected in the Configuration list.
3If needed, enter user name and password for your user account at the Service
Provider.
4Click Connect.
5As soon as the connection is established you can open your web browser and
surf the Internet.
Terminating a
broadband Internet
session
Proceed as follows:
1Click the Internet Connect dockling.
2The following window appears:
Make sure Built-in Ethernet is selected in the Configuration list
3Click Disconnect.
4The connection is released. As a result no Internet connectivity exists any
more.
If the Internet Connect dockling is not available, go to the Applications
folder on the system startup disk and double-click Internet Connect.
If the Internet Connect dockling is not available, go to the Applications
folder on the system startup disk and double-click Internet Connect.