RCA 900 MHz manual Desktop Installation

DESKTOP

INSTALLATION

3

7

4

5

6	1
	2 T/P switch

1.Make sure wall mount bracket is securely fastened.

2.Set the T/P switch to T for touch-tone service, or P for pulse (rotary) service. If you don’t know which type of service you have, check with the phone company.

3.Set RINGER switch (on the handset) to ON.

4.Plug the power supply cord into the POWER 9V DC jack on the base and into an AC outlet.

5.Place handset in the base to charge for 12 hours. The CHARGE light (on the base) comes on to indicate that the battery is charging. If you don’t charge the handset battery properly (for 12 hours) when you first set up the phone, performance of the battery will be compromised.

6.Plug the telephone line cord into the TEL LINE jack on the base and into a modular jack.

7.Raise the base antenna.

CAUTION: Use only the Thomson 5-2472(black)/5-2471(white) power supply that came with this unit. Using other power supplies may damage the unit.

INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference continues, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.

6