OSD (On Screen Display) ON & OFF
This VCR is set to “OSD (On Screen Display) ON” mode at the factory, but you can change it to OFF mode. When a function is changed at the front display or remote control the change will be displayed on the screen.
Simple recording
Load a cassette with its safety tab in place (see page 23).
1
2
*
MAIN MENU
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
OK:CONFIRM MENU:END
VCR SETUP
CLOCK SET LANGUAGE SET RF OUTPUT SET 16:9 SET
OSD ON/OFF
Press MENU. Choose “VCR SETUP” And press OK.
Choose “OSD ON/OFF”.
PROG |
|
|
|
1 | 2 | 3 | TV/VCR |
4 | 5 | 6 | AV |
7 | 8 | 9 | A |
30 | 0 |
|
|
|
|
| EJECT |
SP/LP |
| PR | MENU |
PAL/SEC
INDEX | PR | A.SEL | ||
|
|
|
|
|
STOP SP | PR01 ARD |
| STEREO ON |
|
|
VCR
Press PR+ or PR- to choose the station you want to record.
Press SP/LP if you wish to double the length of the cassette’s recording time.
For example, on an
Press 
to start your recording.
3
OK:CONFIRM MENU:END
OSD ON/OFF
ON
OFF
OK:CONFIRM MENU:END
If you want OSD OFF mode, press PR- and press OK.
OSD characters will not be displayed in the normal picture at the start of each mode change.
VCR
VCR
These buttons are used on the following two pages.
Press 
if you want to stop the recording for a short while.
Press 
to continue recording.
Press 
to stop your recording.
*Though the ”16:9 SET” is displayed on the screen, this function is not available for this set.
16 | 17 |
