RCA BLD-6HD1 instruction manual Press, Other VCR Audio Amp, Devices, Camcorder, Video Player

◆If you are using a RCA cable, select the AV input on the TV to see the picture from the video.

◆If you are not using a RCA cable, select the button number on the TV reserved for video input to see the picture from the video.

◆Switch off all components when connecting or disconnecting cables.

To the TV via antenna cable (if you are not using a RCA cable)

If you are not using a RCA cable, your video can transmit pictures and sound to the TV via the coax aerial cable. Just tune the TV to the video's transmitting channel (factory set to UHF CH 36). Tune the TV carefully to ensure the best pictures and sound.

Copying

AV

To copy to your video from another video machine, connect the two machines with a cable between their RCA sockets and select as

LANGUAGE SET

ENGLISH

DEUTSCH

ITALIANO

ESPAÑOL

FRANÇAIS

NEDERLANDS

SVENSKA

SUOMI

PR+/-:SELECT

OK:CONFIRM MENU:END

MAIN MENU

TIMER PROGRAM

PR PRESET

VCR SETUP

TAPE CONTROL

PR+/-:SELECT

OK:CONFIRM MENU:END

Once you have carried out the steps in "Setting up your video" (previous page), switch on your TV.

◆When you install your VCR first time.

Press button of the video’s remote control.

Tune the TV to the ‘LANGUAGE SET’ using the channel pre-set functions of your TV as described in its manual.

◆When you install your VCR more than two times. (It means you have already done the procedure of P.6 ‘Tuning the TV’)

Press button of the video’s remote control.

Tuning the TV to the blue-back screen, if you found blue back screen on the TV then press MENU button on your video’s remote control and confirm ‘MAIN MENU’ screen is appeared, if not tuning the TV again.

Once you have found the picture of above two cases, follow the instructions within your television manual to store this new channel into a programme location.

TV

(other VCR)

ANT. IN

AUDIO
AUDIO		VIDEO
R	L
L		OUT
		ANT. OUT
R		IN

Other VCR

Audio Amp.	Decoder for Pay-TV
devices
	Camcorder
	Video Player
Assembling

programme "AV" or “F. AV” (front sockets) using the [AV], [PR+/-], or [00] button.

Set the other video machine to playback and your machine to record.

To connect a mono audio source, use the front Audio In socket marked L.

To copy to another video machine from your video, connect the two machines by means of their RCA sockets.

On the other video, select its AV input and set the machine to record.

Switch your video to play back at the position you want copying to start.

If the quality of the test picture transmitted to the TV is poor due to interference caused by a station transmitting on channel 36, you can tune the video to a different transmitting channel. Find a free channel between 21 and 69 on your TV.

Should you wish to assemble your own film, from camcorder footage for example, use the assembly technique for smooth edit points:

◆Move the tape to the position at which the new

RF OUTPUT SET

CH36

0-9:SELECT (21-69)

OK:CONFIRM MENU:END

Call the video’s "MAIN MENU" choose "VCR SETUP" then "RF OUTPUT SET".

Type in the free channel.

Store and exit.

VCR	scene is to be added using the play functions (pages
	13-14).
	◆ Wind back slightly before the edit point and put the
VCR
	machine into pause using the	button (do not

press STOP!).

◆If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV may help (refer to the TV manual).

◆Without a RCA cable, you will not get stereo sound from a TV capable of stereo sound.

2x VCR ◆ Now go directly into record.

For the best results, the source cassette from which you are recording should already be playing back when you start recording.

4 5