RCA DV2011 operation manual Tuner Operation

DV2011

TUNER OPERATION

Recall a Station

7	1	6	4	10						24				23	2	20
													DV2011
														MP3
	MUTE													WMA
				LOUD
	MODE			LOC
				EQ
	BAND						INT	RPT	RDM
						1	2	3	4	5	6	A/PS	DISP		AV IN
5	3	19		8	9	12	13	14	15	16	17	11	18	22		21

Select a band (if needed). Press a preset button (12-17) to select the corresponding stored station.

Automatically Store / Preset Scan

Automatically Store

Select a band (if needed). Press A/PS (11) for more than three seconds to automatically select six strong stations and store them in the current band. The new stations replace any stations already stored in that band.

Preset Scan

Select a band (if needed). Press A/PS (11) to scan stations stored in the current band. The unit will pause for ten seconds at each preset station. Press A/PS again to stop scanning when the desired station is reached.

Select a Band

Press the BAND button (19) on the control panel (or the SOURCE button on the remote control) to change between three FM bands and two AM bands. Each band stores up to six preset stations.

Tuning

Manual Tuning

Press the up >> (20) or down << button (21) for less than three seconds to enter seek tuning mode. Press the up >> or down << button to change the radio frequency number up or down one step.

If using the remote control, press the TUNE + or TUNE - buttons to change the radio frequency number up or down one step.

Auto Seek Tuning

Press the up >> (20) or down << button (21) for more than three seconds to move to the next station automatically.

Preset Stations

Six numbered preset buttons store and recall stations for each band.

Store a Station

Select a band (if needed), then select a station. Press and hold a preset button (12-17) for three seconds. The preset number will appear in the display.

Stereo

The unit will automatically pick up a stereo signal, when available. When in stereo mode, the “” icon appears in the display. When no stereo signal is available, the unit will automatically revert to mono operation, and no icon will be displayed.

12