RCA DV2011 System Menu, General Setup, Speaker Setup, Dolby Digital Setup, Video Setup

DV2011

SYSTEM MENU

Press the (setup) button on the remote control to access the SYSTEM SETUP menu. Use the arrow (<, >) buttons to choose between from the following menu categories:

•General Setup

•Speaker Setup

•Dolby Digital Setup

•Video Setup

•Preference Setup

While in the setup menus, use the (<, >, /\, \/) buttons (29) to select options and change settings.

1.Use the /\ (up) / \/ (down) buttons to select the setting to be changed.

2.Press ENTER to cycle through each possible option or display a list of the options. When a list of options appears, press the /\ (up) / \/ (down) buttons to move among the displayed options.

3.Press ENTER again to choose the option and change the setting.

General Setup Page

TV DISPLAY	NORMAL/PS
	NORMAL/LB
	WIDE
ANGLE MARK	ON/OFF
OSD LANG	ENGLISH
	FRENCH
	GERMAN
	SPANISH
	ITALIAN
	PORTUGUESE
CAPTIONS	ON/OFF
SCREEN SAVER	ON/OFF

•TV DISPLAY: The Display Mode can only be modified when the TV Display mode is set to 4:3.

•NORMAL/PS = Take the maximum value of horizontally fit scale ratio and vertically fit scale ratio.

•NORMAL/LB: Take the minimum value of horizontally fit scale ratio and vertically fit scale ratio.

•WIDE: The 16:9 options is used when the DVD player is connected to a wide screen TV in Full Mode - the screen will display pictures in full size.

•ANGLE MARK: Mark multi-angle scenes.

•OSD LANG: Select the setup menu and OSD (On-screen Display) language used during

the disc playback and instructional operations. The language selection includes: English, Spanish, Greek, Swedish, Dutch, Italian, and Poland. Some DVDs may not include the pre- selected language. In this case, the player automatically displays menus consistent with the disc's initial language setting.

•CAPTIONS: Turn on-screen captioning on/off.

•SCREEN SAVER: Turn the screen saver on/off. The screen saver activates after 330 seconds.

Speaker Setup Page

DOWNMIX	LT/RT
	STEREO

•DOWNMIX: Distinct audio channels are mixed to produce a lower number of channels.

Dolby Digital Setup

DUAL MONO	STEREO
	L-MONO
	R-MONO
	MIX-MONO

•DUAL MONO: Output mono audio to both channels.

Video Setup Page

SHARPNESS	HIGH
	MEDIUM
	LOW
BRIGHTNESS	-20 TO + 20
CONTRAST	-16 TO + 16

•SHARPNESS: Adjust the video screen sharpness to a predetermined HIGH, MEDIUM or LOW setting.

•BRIGHTNESS: Adjust the video screen brightness from -20 (least bright) to +20 (brightest).

•CONTRAST: Adjust the video screen contrast from -20 (least contrast) to +20 (most contrast).

18