![](/images/new-backgrounds/1157573/15757321x1.webp)
Connections & Setup
TV + VCR + DVD Player
1.Connect your TV to your DVD player
A.Connect the audio cables (white and red) to the INPUT2 AUDIO R and L jacks on the back of the TV and to the Audio Output Jacks on the DVD player.
B.If your DVD player has Component Output Jacks (Y, PB, PR), connect three video grade cables to the Y, PB, PR jacks on the DVD player and to the Y, PB, PR jacks on the back of the TV. If your DVD player doesn’t have Y, PB, PR jacks, go to C.
C. If your DVD player has an
Note: If you connect an
L jacks on the back of the TV, not the INPUT2 AUDIO jacks.
D. Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the
INPUT2 VIDEO jack on the back of the TV.
2. Connect your TV to your VCR
Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on your VCR (sometimes labeled OUT TO TV).
Note: If your VCR has A/V input jacks, you can connect your TV to your VCR using audio/video cables for better quality.
3.Connect cable or antenna to your VCR
Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your VCR (sometimes labeled IN FROM ANTENNA or IN FROM ANT).
4.Connect the G-LINK cable to the TV
If you haven’t already done so, remove the Demo Pin from the
Go to page 14
Chapter 1 | 9 |