15
Out of Range
If the handset is too far from the base (out of range) you
may experience static or noise. Move closer to the base
or handset will automatically hang up if it is kept out of
range for 30 seconds.
Battery Low
If the handset battery is low, the unit will emit the alert
tone and show BATTERY LOW in the display to remind you
that the battery needs charging. If the battery voltage is
very low, the handset will automatically shut down. Place
handset in the charge cradle to recharge battery.
Paging All Extension from the Cordless Handset
In the standby mode, press the INT button and then press
zero (0) button twice to activate page all extensions
function.
Paging the Cordless Handset
This feature helps you locate a misplaced handset.
Press the PAGE button once on the base, then press
number 0 button. The cordless handset will beep
continuously (if it is not out of range) for 2 minutes or
until you press any button on the handset.
NOTE: You may still page the cordless handset even if the
ringer is turned off.
Intercom Operation
Answering an Intercom Call
1. Press the INTERCOM button or TALK button.
2. When finished, press the INTERCOM button or TALK
button again.
Receiving an Incoming Telephone Call During
an Intercom Call
During an intercom call, if you receive a telephone call,
you will hear an alert tone. To answer the incoming call,
press the HOLD button to place your intercom call on hold
or press TALK or INT button to drop the intercom call, then
press TALK to answer the telephone call.
Using Intercom with a Telephone Call
During a telephone call, you can use the intercom
function to page another extension unit and set up a
private (2-way) intercom conversation with another user
while the telephone call is placed on hold. Or, you can
create a 3-way conversation between the telephone caller,
the cordless handset and other extensions.
Telephone Operation