21
Dialing a Caller ID Number
When reviewing any call record in the Caller ID memory,
you can dial back the caller’s number.
1. Make sure the phone is OFF (not in talk mode).
2. Press CID/4button once, then 3or4button until the
desired call record is displayed.
Depending on (a) how the incoming caller’s phone
number is formatted when received, and (b) whether
or not you pre-programmed your local area code into
memory, you may need to adjust the format of the
caller’s phone number before dialing it back.
The FORMAT button lets you change the format of the
displayed number. Available formats include:
Number of digits Explanation Example
Eleven digits long distance code “1”
+ 3-digit area code
+ 7-digit telephone
number. 1-317-888-8888
Ten digits 3-digit area code +
7-digit telephone number. 317-888-8888
Seven digits 7-digit telephone number. 888-8888
NOTE: If the phone company does not supply all ten digits
of an incoming caller’s number, you will not be allowed to
adjust the format of that number.
Scroll to the number you want to call back:
3. If the number does not dial as shown, press the
FORMAT button. Repeat if necessary, until the correct
number of digits show in the display.
4. Press the TALK button. The number dials automatically.
Deleting the Current Caller ID Record
To delete only the record in the display:
1. Use the CID/4 button and then 3or4 button to
display the desired Caller ID record.
2. Press DELETE.
Telephone Operation