Connections & Setup
Tips
Leave your cable box turned ON all the time in order to receive listings and record shows.
Leave your VCR turned OFF to record programs.
4.If your VCR stopped playing the tape, the test was successful. Highlight Yes and press OK.
If your VCR didn’t stop playing the tape, you can either choose No or Test this code again.
If the
If you don’t think the test was interrupted, highlight No. Make sure the VCR is playing a tape and is on. Press OK (the TV Guide On Screen system starts testing another set of codes).
Keep following the previous instructions until the TV finds the correct code for the VCR.
Note: If the TV Guide On Screen system can’t locate the correct code for the VCR, a list of troubleshooting instructions appear to help you before you try again.
•Try VCR configuration again: repeat VCR setup.
•Test alternate codes: tests selected brands and if this fails, the test continues with all codes in the system.
•Skip this step: the TV Guide On Screen system won’t be able to automatically schedule programs to record on your VCR.
Step 6: Confirming Your Settings
Check to make sure all settings are complete and correct. If all settings are complete, highlight Yes, end setup and press OK. If your cable box and/or VCR code testing failed, you should see INCOMPLETE where the cable box and VCR codes are listed. Once setup is complete, additional screens appear.
If any settings are incomplete or incorrect, highlight No, repeat setup process and press OK. Follow the instructions on the screen.
Chapter 1 | 25 |
