Using the TV’s Menu System
| Main Menu Picture Quality |
0 Go Back | Auto Color On |
1 Picture Settings | Auto Color Off |
2 Picture Presets
When Auto Color is set to On, it minimizes flesh tone
3 Auto Color | variations. |
4 Color Warmth |
|
5 Noise Reduction |
|
6Convergence
7 SVM | A change in this screen is applied to Input 2. | |
| ||
8 Film Mode | Press or to point to an option, then press OK to select | |
9 Reset Controls | ||
it. Press to return to the menu. |
Auto Color
Auto Color minimizes the flesh tone variations of the TV picture. A different Auto Color setting can be stored for each input. Choose On or Off, depending on your preference.
0 Go Back
1 Picture Settings
2 Picture Presets
3 Auto Color
4 Color Warmth
5 Noise Reduction
6Convergence
7SVM
8Film Mode
9Reset Controls
Main Menu 
Picture Quality
Cool
Normal
Warm
Color Warmth automatically adjusts the "temperature" of the picture. Cool gives a more blue pallete of picture colors. Warm gives a more red pallete of picture colors.
Note: Selecting a new Picture Preset (except for Personal presets) may also change your Color Warmth setting.
A change in this screen is applied to Input 2.
Press or to point to an option, then press OK to select it. Press to return to the menu.
Color Warmth
Color Warmth automatically adjusts the color temperature of the picture. Color Warmth can be stored for each input. The feature lets you set one of three automatic color adjustments:
•Cool More blue.
•Normal Standard picture color.
•Warm More red.
0 Go Back
1 Picture Settings
2 Picture Presets
3 Auto Color
4 Color Warmth
5 Noise ReductionFilter
6Convergence
7SVM
8Film Mode
9Reset Controls
Main Menu 
Picture Quality
Frame Comb
Adaptive
Off
Noise Reduction reduces the appearance of video noise on composite video sources, giving a smoother picture.
For other sources of video, the Noise Reduction is not active.
The Frame Comb setting provides a constant level of improvement. In the Adaptive setting additional filtering is applied, increasing only as the noise content increases.
A change in this screen is applied to Input 2.
Press or to point to an option, then press OK to select it. Press to return to the menu.
Noise Reduction
Noise Reduction displays a list that lets you set one of the three settings that allows you to reduce picture “static” or any type of interference. A Noise Reduction setting can be stored for each input. You can set the Noise Reduction to Frame Comb, Off or Adaptive. The settings are explained in the
0 Go Back
1 Picture Settings
2 Picture Presets
3 Auto Color
4 Color Warmth
5 Noise Reduction
6Convergence
7SVM
8Film Mode
9Reset Controls
Main Menu 
Picture Quality
The Convergence menu has screens for aligning the blue, green, and red projection lenses.
-Auto Converge: Automatically aligns the projection lenses.
-Blue Centering: Align the blue and green images.
-Red Centering: Align the red and green images.
Press OK to go to Convergence which allows you to align your TV's picture.
Convergence
The Convergence feature lets you adjust the TV’s three tubes. When the TV tubes’ images are precisely aligned, they create the color images you see on the screen. Over time, the picture can drift out of alignment (this is normal). If your picture seems fuzzy or has a yellow tint, using Convergence could correct this misalignment.
Note: Make sure the TV has been on for at least 30 minutes (TV needs to warm up for best results).
When you select the Convergence feature, a submenu appears with three options:
•Auto Converge automatically aligns the projection lenses to
Note: After performing auto convergence, use the Blue Centering and Red Centering menus to fine tune convergence in the center of the screen.
•Blue Centering aligns the blue and green images to fine tune the picture.
•Red Centering aligns the red and green images to fine tune the picture.
Note: The ability to change channels is disabled when adjusting the convergence options. The TV must be tuned to a usable signal to converge the picture.
Follow the
Chapter 4 | 65 |
