Equalizer Presets, Audio Processor

Using the TV’s Menu System

0 Go Back

1 TextEqualizerhere Presets

2 Audio Processor

3 Sound Logic

4 Audio Language

5SAP

6Balance

7Fixed/Variable Out

8Digital Audio Out

9Subwoofer

Main Menu	Audio
Flat	Video Equalizer Preset Settings
Standard	+12 dB
Movie
Music
Voice	0 dB
Videogame
Video Camera
Personal	-12 dB +6	+3	0	-5	-10	-5	-3
	60	150	400	1	2.5	6.3	15
	Hz	Hz	Hz	kHz	kHz	kHz	kHz

For each input select a different equalizer preset or create a Personal preset with the equalizer. Press OK to continue.

Equalizer Presets

You can select one of the seven-band Equalizer Presets or create your own personal preset. The seven-band graphic equalizer lets you adjust the audio frequency settings. The equalizer can only be changed if the Fixed/Variable Audio Output is set to Variable Output. If the Fixed/Variable Audio Output is set to Fixed Output, you cannot make changes to the equalizer and the bands are set to 0dB. However, the graphic equalizer levels for Variable Output are stored in memory in case you switch to Fixed Output then back to Variable Output.

Notes: If the internal speakers are used as the center channel audio speaker from an external audio receiver, the graphic equalizer settings do not apply.

Equalizer Presets are stored for each input. All other audio feature settings are stored globally across all inputs and not per input.

Main Menu Audio

Audio Processor

0 Go Back

1 Equalizer Presets

2 Audio Processor

3 Sound Logic

4 Audio Language

5SAP

6Balance

7Fixed/Variable Out

8Digital Audio Out

9Subwoofer

Mono

Stereo

SRS

SRS FOCUS

SRS TruSurround XT

The Audio Processor setting alters the sound of onlyl variable volume outputs but not fixed-volume outputs like the Digital Audio Output or the Record Output.

A change in this screen is applied to all inputs.

Press or to point to an option, then press OK to select it. Press to return to the menu.

The Audio Processor displays a choice list of available audio modes, which control the way the sound comes through your speakers when TV is set to using the Variable Output. The selected setting affects all inputs and antennas.

To create the settings:

1.Press the MENU button to access the main menu.

2.Select Audio, and then Audio Processor. Depending on your speaker setup, any combination of the following options appear:

•Mono plays the sound in monophonic audio only. This should only be used when receiving broadcasts where distance from the broadcasters makes the stereo signal weak. The channel banner displays the word Mono when you tune to a program that is broadcast in mono.

•Stereo Splits the incoming stereo audio signal into left and right front channels. Most TV programs and recorded materials have stereo audio. The channel banner displays the word Stereo when you tune to a program that is broadcast in stereo.

• Adds greater depth and stereo separation to stereo audio signals. Delivers a panoramic 3D sound stage from stereo material.

• Redirects the treble portion of the audio in the speaker system to make dialog more understandable. Repositions and elevates the audio to the center of the TV.