Using the TV’s Menu System
•Stereo Splits the incoming stereo audio signal into left and right front channels. Most TV programs and recorded materials have stereo audio. The channel banner displays the word Stereo when you tune to a program that is broadcast in stereo.
• 
Adds greater depth and stereo separation to stereo audio signals. Delivers a panoramic 3D sound stage from stereo material.
•
Redirects the treble portion of the audio in the speaker system to make dialog more understandable. Repositions and elevates the audio to the center of the TV.
•
Creates a virtual surround sound from multichannel source material through any two- speaker playback system.
0 Go Back
1 Equalizer Presets
2 Audio Processor
3 Sound Logic
4 Audio Language
5SAP
6Balance
7Fixed/Variable Out
8Digital Audio Out
Main Menu 
Audio
Sound Logic Off
Sound Logic On
Turning Sound Logic on will monitor a program's audio track and limit volume excursions to a minimum and maximum volume range from the current volume setting. Acting like a dynamic range limiter, it compresses the dynamic range to limit sudden volume increases (for example, the sudden increase in volume you sometimes hear when a commercial starts).
A change in this screen is applied to all inputs.
Press or to point to an option, then press OK to select it. Press to return to the menu.
Sound Logic
Monitors a program’s audio track and limits volume excursions to a minimum and maximum volume range from current volume setting. Acting like a dynamic range limiter; it compresses the dynamic range to limit suggested volume increases (for example, the sudden increase in volume you sometimes hear when a commercial starts). Choose Sound Logic On or Sound Logic Off, depending on your preference.
0 Go Back
1 Equalizer Presets
2 Audio Processor
3 Sound Logic
4 Audio Language
5SAP
6Balance
7Fixed/Variable Out
8Digital Audio Out
Main Menu Audio |
| |
Default Audio Language | Currently Playing | |
English |
| Audio Language |
| None Available | |
|
| |
Spanish |
| Change Audio |
French | The number of Audio Languages available | |
| ||
German | for the current program is 1. | |
Italian | If the Default Audio Language is available, | |
| then it will be heard; otherwise, the language | |
Japanese | listed above is heard. Use the button above | |
| to change the current program's audio. | |
Korean | Audio Language is only available for | |
Chinese | ||
|
| |
A change in this screen is applied to all inputs.
Press OK to change the Currently Playing Audio Language (if more than one is available).
Audio Language
The Audio Language menu lets you choose the default audio language you want to hear for ATSC (digital TV) programs. If the Audio Language icon ( 
) in the banner lights, it means there is more than one audio language or audio format (Dolby Digital, DTS, etc.) available. The system automatically sets the audio program to the default audio language when the channel you are viewing is a digital terrestrial channel and the specified language is available for that program.
In the Audio Language menu, highlight the default audio language you want by pressing the up and down arrow buttons on your remote control. Press OK to select whenever available on a channel to hear that Audio Language.
Some programs may have audio languages available that you can hear but can’t be set as the default. To select and hear those audio languages, navigate to the “Change Audio” action button and select OK, or use SOUND button on remote.
Note: You can change the Audio Language temporarily by pressing SOUND button on the remote control. Changing channels reverts the channel back to the default Audio Language original selected in the menu.
0 Go Back
1 Equalizer Presets
2 Audio Processor
3 Sound Logic
4 Audio Language
5SAP
6Balance
7Fixed/Variable Out
8Digital Audio Out
Main Menu
Audio
SAP Off
SAP On
SAP stands for "Second Audio Program". When SAP is available for a program, the SAP icon in the channel banner will light up. SAP content can be another language, descriptions for the visually impaired, or audio not related to the program (for example, music or news).
If you set "SAP On" and SAP is available for a program, you will hear SAP for any channel where it is available. SAP is only available for analog (NTSC) programs.
A change in this screen is applied to all inputs.
Press or to point to an option, then press OK to select it. Press to return to the menu.
SAP (Second Audio Program)
When turned on, Second Audio Program plays the program’s audio in a second language, if one is available. SAP is also used to broadcast a program’s audio with descriptions of the video for the visually impaired. Or, SAP might contain audio which is totally unrelated to the video.
Notes: SAP is broadcast in mono and is only available for analog programs, not digital programs.
You can activate SAP (if available) temporarily with the SOUND button. Changing channels reverts SAP back to original SAP menu setting.
TruSurround XT, SRS and (o) symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.
68 | Chapter 4 |
